DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R290 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R290 is one of the best refrigerants available for mass production upto now: Negligible Global Warming Potential (GWP) and degradation time is considered in months: Zero ozone layer depletion potential (ODP): Permanent green: Less load for the same performance; Low energy consumption and higher efficiency.
Thanks to the use of R290, Wotech R290 air to water heat pump is now not only the best solution for new buildings, but also possible to fit the retrofit market by lifting up maximum heating temperature to 70°C. With good performance in this range of water temperatures, it is now possible to replace an old gas/oil boiler with an air-to-water heat pump unit without changing the existing heating distribution system or even the old radiators inside.
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
The DHW tank disinfection function used to kill legionella by 65℃ water to ensure the health and safety
Users can set up the system according to their ideal comfort levels based on the changing levels of heat demand, insulation, etc., with proprietary Heating Curve Logic. By continually monitoring and adjusting the outlet water temperature in opposite directions with the current ambient temperature levels, the Wotech air to water heat pump will ensure optimal comfort in the living spaces by adjusting the outlet water temperature based on the ambient temperature.
Air source heat pumps extract thermal energy (heat) from the outside air and convert this into heating and hotwater for your home. Air source heat pumps are designed to work in cold temperatures and are suitable for arange of homes, from a small apartment to a large detached home. Air source heat pumps do require electricity to operate, but 75% of the energy required is generated from the outside air, with only 25% being required fromelectricity. This means that 75% of the energy you use will be from a renewable source, which will reduce youremissions and CO2 impact
The air source heat pump draws free energy from the air and uses it to heat and cool the building or prepare domestic hot water. It's a cheap, eco-friendly and reliable heat source that anyone can use.
Thanks to cutting-edge technology, Wotech heat pumps operate at a wide range of external temperatures and achieve the high temperature parameters of heating systems or domestic hot water. The emission of no hazardous materials into the environment, operational safety and no maintenance make the Wotech heat pump an ideal solution for everyone building a home and replacing or retrofitting a current heat source..Wotech heat pumps are available for single-family, multifamily and commercial buildings.
DC inverter technology enables the heat pump to adjust its frequencyaccording to real heating requirement. With this technology, Wotech R290 air to water heat pump achieves an energy level of A+++ according to Erp directive.
R290 is one of the best refrigerants available for mass production upto now: Negligible Global Warming Potential (GWP) and degradation time is considered in months: Zero ozone layer depletion potential (ODP): Permanent green: Less load for the same performance; Low energy consumption and higher efficiency.
Thanks to the use of R290, Wotech R290 air to water heat pump is now not only the best solution for new buildings, but also possible to fit the retrofit market by lifting up maximum heating temperature to 70°C. With good performance in this range of water temperatures, it is now possible to replace an old gas/oil boiler with an air-to-water heat pump unit without changing the existing heating distribution system or even the old radiators inside.
Wotech heat pumps are equipped with energy-efficient inverter compressors that allow variable heating capacity adjustment. This increases the efficiency of the entire system and reduces the operating costs of the pump. The higher the coefficient, the more heat can be generated using the same amount of electricity.
DC inverter conversion techniques can achieve equilibrium temperatures, saving power and energy. It adopts DC frequency conversion continuously variable adjustment, which has the advantages of strong power, high efficiency, low noise, stable and reliable performance, and long service life.
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
The DHW tank disinfection function used to kill legionella by 65℃ water to ensure the health and safety
Users can set up the system according to their ideal comfort levels based on the changing levels of heat demand, insulation, etc., with proprietary Heating Curve Logic. By continually monitoring and adjusting the outlet water temperature in opposite directions with the current ambient temperature levels, the Wotech air to water heat pump will ensure optimal comfort in the living spaces by adjusting the outlet water temperature based on the ambient temperature.
Air source heat pumps extract thermal energy (heat) from the outside air and convert this into heating and hotwater for your home. Air source heat pumps are designed to work in cold temperatures and are suitable for arange of homes, from a small apartment to a large detached home. Air source heat pumps do require electricity to operate, but 75% of the energy required is generated from the outside air, with only 25% being required fromelectricity. This means that 75% of the energy you use will be from a renewable source, which will reduce youremissions and CO2 impact
The air source heat pump draws free energy from the air and uses it to heat and cool the building or prepare domestic hot water. It's a cheap, eco-friendly and reliable heat source that anyone can use.
Thanks to cutting-edge technology, Wotech heat pumps operate at a wide range of external temperatures and achieve the high temperature parameters of heating systems or domestic hot water. The emission of no hazardous materials into the environment, operational safety and no maintenance make the Wotech heat pump an ideal solution for everyone building a home and replacing or retrofitting a current heat source..Wotech heat pumps are available for single-family, multifamily and commercial buildings.
English
