In the monoblock type heat pump, the refrigerant system is completely integrated in the external unit. Such a solution ensures, above all, good thermal insulation, space saving and quiet operation of the device. In addition, the compact design ensures easy installation and simple maintenance.
R32 Gas-Low GWP
Good SCOP, energy label rating W35℃ A+++/ W55℃ A++
Smart logic to control multiple heat source
Climate curves suitable for different countries
House heating,cooling and domestic hot water
Full inverter system,Stable and efficient performance
Space heating Series is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does Space heating Series use R32 green gas, but also is rated with A+++ energy label. With top energy rating A+++, the unit is energy efficient and can greatly reduce energy bills for users.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
You can choose different climate correlation curves or your own customised curve. Once the curve is selected, the unit sets the outlet water temperature automatically according to the outdoor ambient air temperature.
Protect your home floor by activating the Floor Preheating function which slowly increases the heating temperature of the floor coils, avoiding possible floor damaging and transitioning smoothly to the heating function. The Floor Drying Up function provides an additional solution to the installer as it helps remove any residual moisture from newly installed floor coils, further protecting the installation and ensuring the optimal and effective operation of the heat pump.
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Smart design to work with other heating facilities in your house, like solar, gas boiler and etc, make sure you to pay the lowest bill for heating !
A heat pump system designed for a single area is intended to warm a small space, usually just one room. These systems consist of an outdoor unit that links to a single indoor unit, providing heating or cooling to the designated area.
If you only need to heat or cool a small part of your house, then a single-area heat pump system is the ideal choice. One common scenario where a single-area system is used is when you want to regulate the temperature in a newly built extension of your home, while the rest of the house is already equipped with a central air conditioning system. Although you have the option to install multiple single-area systems, if you want to heat or cool multiple rooms using air source heat pumps, it would be more energy-efficient to opt for a multi-area system.
A multi-zone heat pump system has the ability to warm and cool different parts of a house by using multiple units in various areas, all linked to a single outdoor unit. By installing a multi-zone system, you have the option to heat or cool different "zones" within your property at different temperatures simultaneously. For instance, during the scorching summer months, you can set the temperature of the room where you spend most of your time to a lower level, while other zones are set at a higher temperature to minimize your overall energy consumption.
Nowadays, numerous heat pump systems are divided into two parts, with each part having a coil. These coils, found in air source heat pump systems, are responsible for either warming or cooling the air.
In contrast, Monoblock heat pump system has its coils and fans positioned in the external unit, while the heated or cooled air is distributed throughout your house through ductwork. The installation of monoblock system is usually less demanding (and thus less costly) compared to split systems. Moreover,monoblock systems occupy less total space, making them a viable option for homes with limited available space.
In the monoblock type heat pump, the refrigerant system is completely integrated in the external unit. Such a solution ensures, above all, good thermal insulation, space saving and quiet operation of the device. In addition, the compact design ensures easy installation and simple maintenance.
R32 Gas-Low GWP
Good SCOP, energy label rating W35℃ A+++/ W55℃ A++
Smart logic to control multiple heat source
Climate curves suitable for different countries
House heating,cooling and domestic hot water
Full inverter system,Stable and efficient performance
Space heating Series is specially developed with the most cutting-edge heat pump technology and modern design to meet stringent requirements for efficiency, stability and quietness. Not only does Space heating Series use R32 green gas, but also is rated with A+++ energy label. With top energy rating A+++, the unit is energy efficient and can greatly reduce energy bills for users.
We choose MITSUBISHI compressor for the heat pump. It ensures stable working in the perfect performance.
You can choose different climate correlation curves or your own customised curve. Once the curve is selected, the unit sets the outlet water temperature automatically according to the outdoor ambient air temperature.
Protect your home floor by activating the Floor Preheating function which slowly increases the heating temperature of the floor coils, avoiding possible floor damaging and transitioning smoothly to the heating function. The Floor Drying Up function provides an additional solution to the installer as it helps remove any residual moisture from newly installed floor coils, further protecting the installation and ensuring the optimal and effective operation of the heat pump.
• More flexibility thanks to two control zones
• Independent control of underfloor heating and radiator heating temperature
• No need to purchase an extension module for second heating system
Smart design to work with other heating facilities in your house, like solar, gas boiler and etc, make sure you to pay the lowest bill for heating !
A heat pump system designed for a single area is intended to warm a small space, usually just one room. These systems consist of an outdoor unit that links to a single indoor unit, providing heating or cooling to the designated area.
If you only need to heat or cool a small part of your house, then a single-area heat pump system is the ideal choice. One common scenario where a single-area system is used is when you want to regulate the temperature in a newly built extension of your home, while the rest of the house is already equipped with a central air conditioning system. Although you have the option to install multiple single-area systems, if you want to heat or cool multiple rooms using air source heat pumps, it would be more energy-efficient to opt for a multi-area system.
A multi-zone heat pump system has the ability to warm and cool different parts of a house by using multiple units in various areas, all linked to a single outdoor unit. By installing a multi-zone system, you have the option to heat or cool different "zones" within your property at different temperatures simultaneously. For instance, during the scorching summer months, you can set the temperature of the room where you spend most of your time to a lower level, while other zones are set at a higher temperature to minimize your overall energy consumption.
Nowadays, numerous heat pump systems are divided into two parts, with each part having a coil. These coils, found in air source heat pump systems, are responsible for either warming or cooling the air.
In contrast, Monoblock heat pump system has its coils and fans positioned in the external unit, while the heated or cooled air is distributed throughout your house through ductwork. The installation of monoblock system is usually less demanding (and thus less costly) compared to split systems. Moreover,monoblock systems occupy less total space, making them a viable option for homes with limited available space.
English
